manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Operating in dusty or sandy conditions (such as unpaved or dusty roads)

Change engine oil and filter.

**

Every 5000 miles (8000 km)
or six months

Perform multi-point inspection.

Change automatic transmission fluid.

Every 30000 miles (48000
km)

Change the PTU and rear axle fluid (AWD). See Axle and PTU Maintenance items under Exceptions later in
this section.

*

 This is an optional feature.

**

Reset your Intelligent Oil-Life Monitor after engine oil and filter changes.  See Engine Oil Check (page 290).

Exceptions

There are several exceptions to the Normal
Schedule:

Axle and PTU Maintenance

The Power Transfer Unit (PTU) and rear axle
(AWD only) in your vehicle does not require
any normal scheduled maintenance unless
the vehicle has experienced extended
periods of extreme/severe duty cycle driving
or the PTU and/or the rear axle has been
submerged in water. Checking the PTU and
rear axle fluid is not necessary unless the
unit shows signs of leakage. Contact an
authorized dealer for service.

California Fuel Filter Replacement

If you register your vehicle in California, the
California Air Resources Board has
determined that the failure to perform this
maintenance item does not nullify the
emission warranty or limit recall liability
before the completion of your vehicle's
useful life. Ford Motor Company, however,
urges you to have all recommended
maintenance services performed at the
specified intervals and to record all vehicle
service.

483

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Scheduled Maintenance

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
SilverLeaf Electronics VMS 645 CL Owner'S Manual preview
VMS 645 CL
Brand: SilverLeaf Electronics Pages: 16
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
RAM RAM C 2013 Specification preview
RAM C 2013
Brand: RAM Pages: 5
Oldsmobile 1994 88 Owner'S Manual preview
1994 88
Brand: Oldsmobile Pages: 276
Volkswagen PASSAT CC - Brochure preview
PASSAT CC -
Brand: Volkswagen Pages: 32

Brands by name

Popular brands

Load more brands