manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

REAR PARKING AID

The rear sensors are only active when the
transmission is in reverse (R). As your vehicle
moves closer to the obstacle, the rate of the
audible warning increases. When the
obstacle is less than 12 in (30 cm) away, the
warning sounds continuously. If the system
detects a stationary or receding object
farther than 12 in (30 cm) from the corners of
the bumper, the tone sounds for only three
seconds. Once the system detects an object
approaching, the warning sounds again.

E130178

Coverage area of up to 6 ft (1.8 m) from the
rear bumper. There may be decreased
coverage area at the outer corners of the
bumper.

The system detects certain objects while the
transmission is in reverse (R) :
•

Your vehicle is moving toward a
stationary object at a speed of 3 mph
(5 km/h) or less.

•

Your vehicle is not moving, but a moving
object is approaching the rear of your
vehicle at a speed of 3 mph (5 km/h) or
less.

•

Your vehicle is moving at a speed of less
than 3 mph (5 km/h) and a moving object
is approaching the rear of your vehicle
at a speed of less than 3 mph (5 km/h).

The system provides audio warnings only
when your vehicle is moving or when your
vehicle is stationary and the detected
obstacle is less than 12 in (30 cm) away from
the bumper.

FRONT PARKING AID

The front sensors are active when the
transmission is in any position other than
park (P) or neutral (N), and your vehicle is
moving but at a speed below 6 mph
(10 km/h).

E187330

Coverage area of up to 28 in (70 cm) from
the front bumper. The coverage area
decreases at the outer corners.

195

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Parking Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Jeep Wrangler2018 Owner'S Manual preview
Wrangler2018
Brand: Jeep Pages: 608
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
CrimeStopper CA-504.BRKT Install Manual preview
CA-504.BRKT
Brand: CrimeStopper Pages: 1
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Pontiac 2007 G6 Owner'S Manual preview
2007 G6
Brand: Pontiac Pages: 486
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4

Brands by name

Popular brands

Load more brands