manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Make sure to change your vehicle’s oils and
fluids at the specified intervals or in
conjunction with a repair. Flushing is a viable
way to change fluid for many vehicle
sub-systems during scheduled maintenance.

It is critical that systems are flushed only with
new fluid that is the same as that required
to fill and operate the system or using a
Ford-approved flushing chemical.

Owner Checks and Services

Make sure you perform the following basic
maintenance checks and inspections every
month or at six-month intervals.

Check every month

Engine oil level.

Function of all interior and exterior lights.

Tires (including spare) for wear and proper pressure.

Windshield washer fluid level.

Check every six months

Battery connections. Clean if necessary.

Body and door drain holes for obstructions. Clean if necessary.

Cooling system fluid level and coolant strength.

Door weatherstrips for wear. Lubricate if necessary.

Hinges, latches and outside locks for proper operation. Lubricate if necessary.

Parking brake for proper operation.

474

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Scheduled Maintenance

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9

Brands by name

Popular brands

Load more brands