manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

The Blind Spot Information System
illuminates an amber alert indicator in the
outside mirror on the side of your vehicle the
approaching vehicle is coming from. When
the Blind Spot Information System is alerting
on a vehicle and the corresponding turn
signal is ON, the Blind Spot Information
System alert indicator flashes as an
increased warning level.

The alert indicator dims when the system
detects nighttime darkness.

Note: The alert indicator flashes in case of
an alert and the turn signal is set to that side
at the same time.

System Sensor Blockage

WARNING

To help avoid injuries, NEVER use the
Blind Spot Information System as a

replacement for using the interior and
exterior mirrors or looking over your shoulder
before changing lanes. The Blind Spot
Information System is not a replacement for
careful driving.

E205199

The system uses radar sensors that are
located behind the bumper fascia on each
side of your vehicle. Any dirt, mud and snow
in front of the sensors and/or driving in heavy
rain can cause system degradation. Also,
other types of obstructions in front of the
sensor can cause system degradation. This
is referred to as a ‘blocked’ condition.

Note: Do not apply bumper stickers and/or
repair compound to these areas, this can
cause degraded system performance.

If the system detects a degraded
performance condition, a message warning
of a blocked sensor will appear in the
information display. Also the BLIS alert
indicators will remain ON and BLIS will no
longer provide any vehicle warnings. You
can clear the information display warning but
the alert indicators will remain illuminated.

224

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Buick 2005 Terraza Owner'S Manual preview
2005 Terraza
Brand: Buick Pages: 428
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Lexus 2015 LX 570 Settings User Manual preview
2015 LX 570
Brand: Lexus Pages: 6
Magneti Marelli BCF636 Installation Instruction preview
BCF636
Brand: Magneti Marelli Pages: 2
Fab Fours H3250 Installation Instructions Manual preview
H3250
Brand: Fab Fours Pages: 13
Prorack T84HALF Instruction Manual preview
T84HALF
Brand: Prorack Pages: 7
PNI Escort P05 A User Manual preview
Escort P05 A
Brand: PNI Pages: 12
Davis Instruments 8126VSS Installation Manual preview
8126VSS
Brand: Davis Instruments Pages: 16
Husky 33094 Assembly, Installation, Operation And Maintenance Instructions preview
33094
Brand: Husky Pages: 18

Brands by name

Popular brands

Load more brands