manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

If your vehicle loses electrical power while
you are driving, electric power steering
assistance is lost. The steering system still
operates and you can steer your vehicle
manually. Manually steering your vehicle
requires more effort.

Extreme continuous steering may increase
the effort required for you to steer your
vehicle. This increased effort prevents
overheating and permanent damage to the
steering system. You do not lose the ability
to steer your vehicle manually. Typical
steering and driving maneuvers allow the
system to cool and return to normal
operation.

Steering Tips

If the steering wanders or pulls, check for:
•

Correct tire pressures.

•

Uneven tire wear.

•

Loose or worn suspension components.

•

Loose or worn steering components.

•

Improper vehicle alignment.

Note: A high crown in the road or high
crosswinds may also make the steering
seem to wander or pull.

Adaptive Learning

The electronic power steering system
adaptive learning helps correct road
irregularities and improves overall handling
and steering feel. It communicates with the
brake system to help operate advanced
stability control and accident avoidance
systems. Additionally, whenever the battery
is disconnected or a new battery installed,
you must drive your vehicle a short distance
before the system relearns the strategy and
reactivates all systems.

COLLISION WARNING SYSTEM

 (If

Equipped)

Principle Of Operation

 (If Equipped)

WARNINGS

This system is an extra driving aid. It
does not replace your attention and

judgment, or the need to apply the brakes.
This system does NOT automatically brake
your vehicle. If you fail to press the brake
pedal when necessary, you may collide with
another vehicle.

The collision warning system with
brake support cannot help prevent all

collisions. Do not rely on this system to
replace your judgment and the need to
maintain correct distance and speed.

Note: The system does not detect, warn or
respond to potential collisions with vehicles
to the rear or sides of your vehicle.

Note: The collision warning system is active
at speeds above approximately 5 mph
(8 km/h).

230

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
APS Auto Parts Specialist iBoard IB-ZK406 Installation Instructions preview
iBoard IB-ZK406
Brand: APS Auto Parts Specialist Pages: 3
Wagan 2227-1 User Manual preview
2227-1
Brand: Wagan Pages: 8
Thermo King T- series Driver Manual To Simple Operation preview
T- series
Brand: Thermo King Pages: 2
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Brand: HAUL MASTER Pages: 8
K40 ELECTRONICS K40 Platinum360 Owner'S Manual preview
K40 Platinum360
Brand: K40 ELECTRONICS Pages: 11
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Chrysler Dodge Caravan 2002 Manual preview
Dodge Caravan 2002
Brand: Chrysler Pages: 2399
Ednet 84104 User Manual preview
84104
Brand: Ednet Pages: 6
Webasto HOLLANDIA 700 - 20 Series Service Manual preview
HOLLANDIA 700 - 20 Series
Brand: Webasto Pages: 30
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228
Van Guard VG162S Fitting Instructions preview
VG162S
Brand: Van Guard Pages: 3
Whispbar K144W Fitting Instructions Manual preview
K144W
Brand: Whispbar Pages: 78
Metra Electronics LEXUS 99-8156 Installation Instructions Manual preview
LEXUS 99-8156
Brand: Metra Electronics Pages: 8

Brands by name

Popular brands

Load more brands