Lincoln 2017 MKC Owner'S Manual Download Page 300 | Manualshive

Page: 300 / 538

background image

When a battery replacement is required, you
must use a recommended replacement
battery that matches the electrical
requirements of the vehicle.

Note: If your vehicle has a battery cover,
after cleaning or replacing the battery, make
sure you reinstall it.

Note: See an authorized dealer for battery
access, testing, or replacement.

To make sure the battery management
system works correctly, do not connect an
electrical device ground connection directly
to the battery negative post. This can cause
inaccurate measurements of the battery
condition and potential incorrect system
operation.

Note: If you add electrical accessories or
components to the vehicle, it may adversely
affect battery performance and durability.
This may also affect the performance of
other electrical systems in the vehicle.

If you see any corrosion on the battery or
terminals, remove the cables from the
terminals and clean with a wire brush. You
can neutralize the acid with a solution of
baking soda and water.

Because your vehicle’s engine is
electronically-controlled by a computer,
some engine control settings are maintained
by power from the battery. Some engine
computer settings, like the idle trim and fuel
trim strategy, optimize the driveability and
performance of the engine. The clock and
radio station presets are also maintained in
memory by power from the low-voltage
battery. These settings are erased when a
technician disconnects and connects the
low-voltage battery.

To restore the settings, do the following:

Note: Until you switch the ignition to the on
position, you will receive a message in your
information display stating that your vehicle
is not in park.

1. Apply the parking brake.

2. Shift into park (P) or neutral (N).

3. Switch off all accessories.

4. Press the brake pedal and start your

vehicle.

5. Run the engine until it reaches normal

operating temperature. While the engine
is warming up, complete the following:
Reset the clock. See Audio System
(page 362). Reset the power windows
bounce-back feature. See Windows and
Mirrors (page 93). Reset the radio station
presets. See Audio System (page 362).

6. Allow the engine to idle for at least one

minute.

7. Drive the vehicle at least 10 mi (16 km) to

completely relearn the idle trim and fuel
trim strategy.

Note: If you do not allow the engine to
relearn the idle and fuel trim strategy, the
idle quality of your vehicle may be adversely
affected until the engine computer
eventually relearns the idle trim and fuel trim
strategy.

Note: Certain features may not operate if
the battery monitor system is not reset with
a scan tool following a jump start or battery
replacement. Normal electrical accessory
operation should resume after your vehicle
is left undisturbed for 8 hours.

297

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Maintenance

«
...
298
299
300
301
302
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: RaceChip Pages: 20

Brand: GATmatic Pages: 13

Brand: Axxess Pages: 8

Brand: XTC Pages: 4

Brand: Menabo Pages: 12

Brand: Mercedes-Benz Pages: 358

Brand: Velleman Pages: 12

Brand: Oypla Leisure Pages: 4

Brand: Carcomm Pages: 2

Brand: Kia Pages: 233

Brand: Mercedes-Benz Pages: 585

Brand: Poison Spyder Pages: 5

Brand: Metra Electronics Pages: 8

Brand: Brodit Pages: 2

Brand: DICE Pages: 1

Brand: Hudson Pages: 24

Advanced Million Color

Brand: LedGlow Pages: 4

Brand: Istar Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands