manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Perform the services shown in the following
tables when specified or within 3000 miles
(4800 kilometers) of the message appearing
in the information display, prompting you to
change your oil.
•

Example 1: The message comes on at
28751 miles (46270 kilometers). Perform
the 30000-mile (48000-kilometer)
automatic transmission fluid replacement.

•

Example 2: The message has not come
on, but the odometer reads 30000 miles
(48000 kilometers) (for example, the
Intelligent Oil-Life Monitor was reset at
25000 miles [40000 kilometers]).
Perform the engine air filter replacement.

Towing a trailer or using a car-top carrier

Change engine oil and filter as indicated by the information display and perform services listed in the Normal
Scheduled Maintenance chart.

As required

Inspect rear axle and U-joints (AWD).

Inspect frequently, service
as required

Change automatic transmission fluid.

Every 30000 miles (48000
km)

Change the PTU and rear axle fluid (AWD). See Axle and PTU Maintenance items under Exceptions later in
this section.

Replace spark plugs.

Every 60000 miles (96000
km)

481

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Scheduled Maintenance

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
Cadillac ESCALADE - BROCHURE 2009 Personalization Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 24
Cadillac Escalade Personalization Manual preview
Escalade
Brand: Cadillac Pages: 20
Cadillac Escalade 2016 Convenience/Personalization Manual preview
Escalade 2016
Brand: Cadillac Pages: 20
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Havis-Shields 1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P Datasheet preview
1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P
Brand: Havis-Shields Pages: 1
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
Blaupunkt 7 608 502 000 Installation Instructions Manual preview
7 608 502 000
Brand: Blaupunkt Pages: 6
Mitsubishi Outlander Plug-in hybrid Quick Manual preview
Outlander Plug-in hybrid
Brand: Mitsubishi Pages: 28
Painless Performance VORTEC 60211 Installation Instructions Manual preview
VORTEC 60211
Brand: Painless Performance Pages: 16
EUFAB 11439 Assembly preview
11439
Brand: EUFAB Pages: 8

Brands by name

Popular brands

Load more brands