Lincoln 2017 MKC Owner'S Manual Download Page 129

Page: 129 / 538

Park Aid

Action

Message

The system has detected a condition that requires service. Contact an authorized dealer. See

Front Parking Aid (page 195).

Check Front Park Aid

The system has detected a condition that requires service. Contact an authorized dealer. See

Rear Parking Aid (page 195).

Check Rear Park Aid

Displays the park aid status.

Front Park Aid On Off

Displays the park aid status.

Rear Park Aid On Off

Park Brake

Action

Message

You have set the parking brake and you have driven the vehicle more than 3 mph (5 km/h). If

the warning stays on after you have released the parking brake, contact an authorized dealer.

Park Brake Engaged

The electric parking brake system has detected a condition that requires service. See an

authorized dealer.

Park Brake Malfunction Service Now

The electric parking brake is not set.

Park Brake Not Applied

The electric parking brake is running a diagnostic check.

Park Brake Maintenance Mode

The electric parking brake is set but you have not released it.

Park Brake Use Switch to Release

126

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Information Displays

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands

Lincoln 2017 MKC, Owner'S Manual

Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands