Lincoln 2017 MKC Owner'S Manual Download Page 66 | Manualshive

Page: 66 / 538

background image

LOCKING AND UNLOCKING

You can use the power door lock or the
remote control to lock and unlock your
vehicle.

Power Door Locks

The power door lock is on the driver and
front passenger door panels.

E138628

Unlock

A

Lock

B

Door Lock Indicator

An LED on each door window trim lights
when you lock the door. It remains on for up
to five minutes after you switch the ignition
off.

Switch Inhibitor

When you electronically lock your vehicle,
the power door lock and interior luggage
compartment release switch will no longer
operate after 20 seconds. You must unlock
your vehicle with the remote control or
keyless keypad, or switch the ignition on, to
restore function to these switches. You can
switch this feature on or off in the information
display. See General Information (page 108).

Remote Control

You can use the remote control at any time.
The luggage compartment release button
only works when your vehicle speed is less
than 5 mph (8 km/h).

Unlocking the Doors (Two-Stage Unlock)

E138629

Press the button to unlock the
driver door. Press the button again
within three seconds to unlock all

doors. The direction indicators will flash.

Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking. Disabling two-stage unlocking
allows all vehicle doors to unlock with one
press of the button. The direction indicators
will flash twice to indicate a change to the
unlocking mode. The unlocking mode
applies to the remote control, keyless entry
keypad and intelligent access.

Intelligent access at the driver door will
unlock all doors when you disable two-stage
unlocking.

Locking the Doors

E138623

Press the button to lock all the
doors. The direction indicators will
flash.

63

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Locks

«
...
64
65
66
67
68
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Westin Pages: 3

Brand: Metra Electronics Pages: 2

Brand: Thule Pages: 8

Brand: Whispbar Pages: 17

Brand: Easee Pages: 12

Truck Diesel Supplement 2012

Brand: RAM Pages: 174

1966 Spider 105

Brand: Alfa Romeo Pages: 46

Brand: Oldsmobile Pages: 354

Brand: Vangear Pages: 5

Brand: Safe Fleet Pages: 20

Brand: ConWys AG Pages: 16

Brand: Mercedes-Benz Pages: 296

Brand: Connects2 Pages: 8

Brand: Fabbri Pages: 32

Brand: Whelen Engineering Company Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands