Lincoln 2017 MKC Owner'S Manual Download Page 94 | Manualshive

Page: 94 / 538

background image

E142451

Manually Overriding the System

E169254

Push or pull the lever to switch between high
and low beam.

DIRECTION INDICATORS

E170427

Push the lever up or down to use the
direction indicators.

Note: Tap the lever up or down to make the
direction indicators flash three times to
indicate a lane change.

WELCOME LIGHTING

The Lincoln welcome mat projection lights
are on the bottom of the exterior mirror
housings. They will project an image onto
the ground a short distance from your vehicle
when welcome lighting or lighted entry turns
on.

For auto-fold mirrors, the Lincoln welcome
mat will turn on when welcome lighting or
lighted entry turns on and the mirrors have
been automatically folded in upon locking
or using the switch on the door.

Note: Moisture, frost and ice build-up or
other types of contamination on the surface
of the light lens can cause non-permanent
distortion or reduced brightness of the
image. Do not use abrasive materials to
clean the lens.

Note: If you enable auto-fold and then you
fold the mirrors in manually to the door
window glass, then the welcome mats will
not turn on.

91

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Lighting

«
...
92
93
94
95
96
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: ZAPTEC Pages: 240

Multiple G9F18 AU000

Brand: Genesis Pages: 3

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Mobile Create Pages: 15

1973 Convertible

Brand: Volkswagen Pages: 80

Brand: BrandMotion Pages: 2

Brand: Cadillac Pages: 407

Brand: Yakima Pages: 15

Brand: Conrad Pages: 50

Brand: KLAUS Multiparking Pages: 72

Brand: Jaeger Pages: 14

Brand: RAM Pages: 5

CHALLENGER HELLCAT 2017

Brand: Dodge Pages: 484

Brand: DRAGONFIRE Pages: 4

Brand: Conrad Pages: 8

Quantum Wash'n'Wipe N30205

Brand: National Cycle Pages: 12

Brand: AL-KO Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands