manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

DRIVER ALERT

 (If Equipped)

WARNING

The system is designed to aid the
driver. It is not intended to replace your

attention and judgment. You are still
responsible to drive with due care and
attention.

Note: The system will store the on or off
setting in the information display menu
through ignition cycles.

Note: If enabled in the menu, the system will
be active at speeds above 40 mph (64 km/h).
When below the activation speed, the
information display will inform you that the
system is unavailable.

Note: The system works as long as one lane
marking can be detected by the camera.

Note: If the camera is blocked or if the
windshield is damaged, the system may not
function.

Note: The system may not be available in
poor weather or other low visibility
conditions.

The system automatically monitors your
driving behavior using various inputs
including the front camera sensor.

If the system detects that your driving
alertness is reduced below a certain
threshold, the system will alert you using a
chime and a message in the information
display.

Using Driver Alert

Switching the system on and off

You may switch the system on or off through
the information display.  See General
Information (page 108).  When activated, the
system will monitor your alertness level
based upon your driving behavior in relation
to the lane markings, and other factors.

System Warnings

Note: The system will not issue warnings
below approximately 40 mph (64 km/h).

The warning system is in two stages. At first
the system issues a temporary warning that
you need to take a rest. This message will
only appear for a short time. If the system
detects further reduction in driving alertness,
another warning may be issued which will
remain in the information display for a longer
time. Press OK on the steering wheel control
to clear the warning.

System Display

When active the system will run automatically
in the background and only issue a warning
if required. You can view the status at any
time using the information display.  See
General Information (page 108).

The alertness level is shown by six steps in
a colored bar.

E131358

217

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Jeep Commander Overview Manual preview
Commander
Brand: Jeep Pages: 25
Jeep Commander Warranty Information Booklet preview
Commander
Brand: Jeep Pages: 51
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Toyota 2011 Corolla LE Brochure preview
2011 Corolla LE
Brand: Toyota Pages: 19
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15

Brands by name

Popular brands

Load more brands