Lincoln 2017 MKC Owner'S Manual Download Page 143

Page: 143 / 538

The rear center head restraint consists of:

An energy absorbing head
restraint.

Two steel stems.

Guide sleeve unlock and remove
button.

Adjusting the Head Restraint

Raising the Front Seat Head Restraint

Pull the head restraint up.

Lowering the Front Seat Head Restraint

1. Press and hold button C.
2. Push the head restraint down.

Removing the Head Restraint

1. Pull the head restraint up until it reaches

its highest position.

2. Press and hold buttons C and D.
3. Pull the head restraint up.

Installing the Head Restraint

Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.

Folding the Rear Seat Head Restraint

1. Press and hold button E.

2. Pull it back up to reset.

Tilting Head Restraints

The front seat head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:

E144727

1. Adjust the seatback to an upright driving

or riding position.

2. Pivot the head restraint forward toward

your head to the desired position.

After the head restraint reaches the
forward-most tilt position, pivot it forward
again to release it to the rearward, un-tilted
position.

140

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Seats

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands

Lincoln 2017 MKC, Owner'S Manual

Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands