manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Note: You may have to press the push
button ignition switch twice to switch the
ignition on.

Start: Starts the engine.

•

Press the brake pedal, and then press
the button for any length of time. An
indicator light on the button illuminates
when then ignition is on and when the
engine starts.

STARTING A GASOLINE ENGINE

When you start the engine, the idle speed
increases, this helps to warm up the engine.
If the engine idle speed does not slow down
automatically, have your vehicle checked by
an authorized dealer.

Note: If your vehicle is equipped with remote
start, you can start your vehicle with the
remote, and then drive away by pressing the
brake pedal and pushing a button on the
transmission. This allows you to drive away
without pressing the engine start button.

Before starting the engine, check the
following:
•

Make sure all occupants have fastened
their safety belts.

•

Make sure the headlamps and electrical
accessories are off.

•

Make sure the parking brake is on.

•

Put the transmission in P.

Note: Do not touch the accelerator pedal.

1. Fully press the brake pedal.
2. Press the button.

The system does not function if:
•

The key frequencies are jammed.

•

The key battery has no charge.

If you are unable to start the engine, do the
following:

E170454

1. Open the center console lid.

2. Slide the remote into the back-up slot.

3. With the key in this position, press the

brake pedal, then the START button to
switch the ignition on and start your
vehicle.

Fast Restart

The fast restart feature allows you to restart
the engine within 20 seconds of switching it
off, even if a valid key is not present.

157

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Starting and Stopping the Engine

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Thule Kit 1312 Instructions Manual preview
Kit 1312
Brand: Thule Pages: 8
Reliant Rebel 700 1967 Workshop Manual preview
Rebel 700 1967
Brand: Reliant Pages: 116
Waeco MagicWatch MWE150 Installation And Operating Manual preview
MagicWatch MWE150
Brand: Waeco Pages: 176
Ford 2006 F-250 Owner'S Manual preview
2006 F-250
Brand: Ford Pages: 312
Directed 933.SUBARU1 Installation Manual preview
933.SUBARU1
Brand: Directed Pages: 24
Federal Signal Corporation CommCenter 300MB-SD Installation And Maintenance Manual preview
CommCenter 300MB-SD
Brand: Federal Signal Corporation Pages: 60
Boyo VTSR100 User Manual preview
VTSR100
Brand: Boyo Pages: 2
RUSPA NUT LOCK Quick Start Manual preview
NUT LOCK
Brand: RUSPA Pages: 5
Lexus 2014 GX 460 Quick Manual preview
2014 GX 460
Brand: Lexus Pages: 94
Jeep Wrangler Postal Vehicle 2017 Owner'S Manual Supplement preview
Wrangler Postal Vehicle 2017
Brand: Jeep Pages: 62

Brands by name

Popular brands

Load more brands