manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

If you use oil and fluids that do not meet the
defined specification and viscosity grade,
this may lead to:
•

Component damage which is not
covered by the vehicle warranty.

•

Longer engine cranking periods.

•

Increased emission levels.

•

Reduced engine performance.

•

Reduced fuel economy.

•

Degraded brake performance.

We recommend Motorcraft® motor oil for
your vehicle. If Motorcraft® oil is not available,
use motor oils of the recommended viscosity
grade that meet API SN requirements and
display the API Certification Mark for gasoline
engines. Do not use oil labeled with API SN
service category unless the label also
displays the API certification mark.

E142732

An oil that displays this symbol conforms to
current engine, emission system and fuel
economy performance standards of the
International Lubricants Specification
Advisory Committee (ILSAC).

Do not use supplemental engine oil additives
because they are unnecessary and could
lead to engine damage that may not be
covered by your vehicle warranty.

Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other materials
may result in brake system damage and
possible failure.

Note:  Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid.  The use
of any other fluid may cause transmission
damage.

355

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Capacities and Specifications

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

kaarta STENCIL PRO Assembly & Use preview
STENCIL PRO
Brand: kaarta Pages: 29
Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Brand: Q'STRAINT Pages: 10
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
Hummer 2006 H2 Owner'S Manual preview
2006 H2
Brand: Hummer Pages: 502
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Ford TRANSIT CUSTOM Quick Reference Manual preview
TRANSIT CUSTOM
Brand: Ford Pages: 15
Honda 08L04-SZA-100 Installation Instructions preview
08L04-SZA-100
Brand: Honda Pages: 3
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
Connects2 PARK-401 User Manual preview
PARK-401
Brand: Connects2 Pages: 2
Mazda 2006 MPV Quick Tips preview
2006 MPV
Brand: Mazda Pages: 14
Mercedes-Benz W211 Manual preview
W211
Brand: Mercedes-Benz Pages: 27
ULTIMATE SPEED UKLL 5 A1 Operating Instructions Manual preview
UKLL 5 A1
Brand: ULTIMATE SPEED Pages: 132

Brands by name

Popular brands

Load more brands