manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

•

Wet weather driving capability.

•

All-wheel driving capability

When driving with the full-size dissimilar
spare wheel and tire assembly additional
caution should be given to:
•

Towing a trailer.

•

Driving vehicles equipped with a camper
body.

•

Driving vehicles with a load on the cargo
rack.

Drive cautiously when using a full-size
dissimilar spare wheel and tire assembly and
seek service as soon as possible.

Tire Change Procedure

WARNINGS

When one of the front wheels is off the
ground, the transmission alone will not

prevent your vehicle from moving or slipping
off the jack, even if the transmission is in park
(P) or neutral (N).

WARNINGS

To help prevent your vehicle from
moving when you change a tire, be

sure to place the transmission in park (P) or
neutral (N), set the parking brake, and block
(in both directions) the wheel that is
diagonally opposite (other side and end of
your vehicle) to the tire being changed.

Never get underneath a vehicle that is
supported only by a jack. If the vehicle

slips off the jack, you or someone else could
be seriously injured.

Do not attempt to change a tire on the
side of the vehicle close to moving

traffic. Pull far enough off the road to avoid
the danger of being hit when operating the
jack or changing the wheel.

Always use the jack provided as
original equipment with your vehicle.

If using a jack other than the one provided
as original equipment with your vehicle,
make sure the jack capacity is adequate for
the vehicle weight, including any vehicle
cargo or modifications.

Note: Passengers should not remain in your
vehicle when the vehicle is being jacked.

1. Park on a level surface, set the parking

brake and activate the hazard flashers.

2. Place the transmission in park (P) and

turn the engine off.

3. Remove the carpeted wheel cover.

4. Remove the wing nut that secures the

spare tire by turning it counterclockwise.

E160855

5. Remove the jack from the foam holder.

The lug wrench is located in the left side
storage foam next to the spare tire.
Remove the flat tire retainer strap from
the jack base.

338

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Wheels and Tires

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Tellur BASIC TLL171231 User Manual preview
BASIC TLL171231
Brand: Tellur Pages: 5
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
r.LiNK RL2-NBT Manual preview
RL2-NBT
Brand: r.LiNK Pages: 20
AD Boivin ZX2 2008 Adjustment Manual preview
ZX2 2008
Brand: AD Boivin Pages: 37
APS iArmor IA-S159 Installation Instructions preview
iArmor IA-S159
Brand: APS Pages: 4
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2
Erich Jaeger 735229 Installation Instructions Manual preview
735229
Brand: Erich Jaeger Pages: 16
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111

Brands by name

Popular brands

Load more brands