Lincoln 2017 MKC Owner'S Manual Download Page 223 | Manualshive

Page: 223 / 538

background image

Note: The alert and aid diagrams illustrate
general zone coverage. They do not indicate
the exact zone coverage area.

Intensity: This setting affects the intensity of
the steering wheel vibration used for the alert
and alert + aid modes. This setting is not valid
for the aid mode.

•

Low

•

Medium

•

High

System Display

E151660

When you turn the system on, an overhead
graphic of a vehicle with lane markings will
display in the information display. If you turn
the system on and select aid mode, arrows
will display along with the lane markings.

When you turn the system off, the lane
marking graphics will not display.

Note: If adaptive cruise control is enabled
the overhead vehicle graphic may still be
displayed.

While the system is on, the color of the lane
markings will change to indicate the system
status.

Gray: Indicates that the system is temporarily
unable to provide a warning or intervention
on the indicated side(s). This may be
because:

•

Your vehicle is under the activation
speed.

•

Your turn indicator is active.

•

Your vehicle is in a dynamic maneuver.

•

The road has no or poor lane markings
in the camera field-of-view.

•

The camera is obscured or unable to
detect the lane markings due to
environmental conditions (significant sun
angles, shadows, snow, heavy rain, fog),
traffic conditions (following a large
vehicle that is blocking or shadowing the
lane), or vehicle conditions (poor
headlamp illumination).

See Troubleshooting for additional
information.

Green: Indicates that the system is available
or ready to provide a warning or intervention,
on the indicated side(s).

Yellow: Indicates that the system is providing
or has just provided a lane keeping aid
intervention.

Red: Indicates that the system is providing
or has just provided a lane keeping alert
warning.

You can temporarily disable the system at
any time by doing the following:

•

Quick braking.

•

Fast acceleration.

220

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

«
...
221
222
223
224
225
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: AA Products Pages: 8

Brand: Toyota Pages: 529

Brand: VanEssa mobilcamping Pages: 8

Gemineye EC2014-C

Brand: Ecco Pages: 10

Reflex 5500 Series

Brand: Ecco Pages: 12

Brand: Yakima Pages: 11

Brand: TrailFX Pages: 6

Brand: BrandMotion Pages: 8

Brand: MASCOT Pages: 12

Brand: AddSecure Pages: 14

Brand: FALCON RIDGE Pages: 8

Brand: Scosche Pages: 8

Brand: Cadillac Pages: 20

ADARAC Aluminum M Series

Brand: aci Pages: 16

Brand: Imiola HAK-POL Pages: 3

Brand: v.link Pages: 21

Brand: Lantronix Pages: 51

Brand: Z Flash Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands