manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

AUTO-START-STOP

The system helps reduce fuel consumption
by automatically shutting off and restarting
the engine while your vehicle is stopped.
The engine will restart automatically when
you release the brake pedal. In some
situations, your vehicle may restart
automatically, for example:

•

To maintain interior comfort

•

To recharge the battery

Note: Power assist steering is turned off
when the engine is off.

WARNINGS

The engine may restart automatically
if required by the system.

Switch the ignition off before opening
the hood or performing any

maintenance. Failure to do so may result in
serious injuries due to automatic engine
restart.

WARNINGS

Always switch the ignition off before
leaving your vehicle, as the system may

have turned the engine off, but the ignition
will still be on and automatic restart may
occur.

The Auto StartStop system status is available
at a glance within the information display.
See Information Displays (page 108).

Enabling Auto StartStop

The system is automatically enabled every
time you start your vehicle if the following
conditions are met:

•

The Auto StartStop button is not pressed
(not illuminated).

•

Your vehicle exceeds an initial speed of
3 mph (5 km/h) after the vehicle has been
initially started.

•

Your vehicle is stopped.

•

Your foot is on the brake pedal.

•

The transmission is in drive (D).

•

The driver's door is closed.

•

There is adequate brake vacuum.

•

The interior compartment has been
cooled or warmed to an acceptable level.

•

The front windshield defroster is off.

•

The steering wheel is not turned rapidly
or is not at a sharp angle.

•

The vehicle is not on a steep road grade.

•

The battery is within optimal operating
conditions (battery state of charge and
temperature in range).

•

The engine coolant is at operating
temperature.

•

Elevation is below approximately
10,000 ft (3,048 m).

•

Ambient temperature is moderate.

Note: The system allows multiple successive
Auto StartStop events, but it may not operate
in conditions of heavy traffic or in extended
low speed operation.

The green Auto StartStop indicator
light on the instrument cluster will
illuminate to indicate when the

automatic engine stop occurs.

161

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Unique Driving Characteristics

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
BMW 84 61 0 028 926 Installation Instructions Manual preview
84 61 0 028 926
Brand: BMW Pages: 13
Roadtrek SS Agile 2017 Owner'S Manual preview
SS Agile 2017
Brand: Roadtrek Pages: 61
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21
STO N SHO SNS 297 Installation Procedures Manual preview
SNS 297
Brand: STO N SHO Pages: 7
MBW i Wallbox Plus Owner'S Manual preview
i Wallbox Plus
Brand: MBW Pages: 40
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4
Whelen Engineering Company SAK62D Installation Manual preview
SAK62D
Brand: Whelen Engineering Company Pages: 2
AutoMaxi SILVER line 104 Quick Start Manual preview
SILVER line 104
Brand: AutoMaxi Pages: 4
AdvanceTec AdvanceMobile VX1 Installation & User Manual preview
AdvanceMobile VX1
Brand: AdvanceTec Pages: 20
Cadillac 1995 Sedan De Ville Owner'S Manual preview
1995 Sedan De Ville
Brand: Cadillac Pages: 403
achilles AD293 Manual preview
AD293
Brand: achilles Pages: 18

Brands by name

Popular brands

Load more brands