manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Driver temperature control: Adjust the temperature setting on the driver side. This control also adjusts the passenger side temperature
when you switch off dual zone mode.

A

Fan speed control: Adjust the volume of air circulated in the vehicle.

B

Passenger temperature control: Adjust the temperature setting on the passenger side.

C

MAX A/C: Press for maximum cooling. The driver and passenger temperature settings are set to LO. Recirculated air flows through
the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed.

D

A/C: Press to switch the air conditioning on or off. To improve the time to reach a comfortable temperature in hot weather, drive
with the windows open until you feel cold air through the air vents. You can use A/C with recirculated air to improve performance
and efficiency.

E

Note: In certain conditions (for example, maximum defrost), the air conditioning may continue to operate even though the air
conditioning is switched off.

Recirculated air: Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates.
This can reduce the time needed to cool the interior and reduce unwanted odors from entering your vehicle.

F

Note: Recirculated air may also turn on and off automatically in instrument panel or instrument panel and floor airflow modes during
hot weather to improve cooling efficiency and reduce risk of fogging.

Heated seats: Press to switch the heated seats on and off.  See Heated Seats (page 145).

G

Climate controlled seats: Press to switch the climate controlled seats on and off.  See Climate Controlled Seats (page 146).

H

DUAL: Press to switch separate passenger side temperature control on and off. When dual zone is off, passenger temperature
settings remain the same as the driver settings.

I

AUTO: Press to switch on automatic operation. Adjust to select the desired temperature. Fan speed, air distribution, air conditioning
operation, and outside or recirculated air are automatically adjusted to heat or cool the vehicle to maintain the desired temperature.
You can also switch off dual zone mode by pressing and holding for more than two seconds.

J

134

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Climate Control

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
Mazda 2010 MX-5 Miata Specification preview
2010 MX-5 Miata
Brand: Mazda Pages: 8
Toyota RAV-4 2015 Series Owner'S Manual Supplement preview
RAV-4 2015 Series
Brand: Toyota Pages: 50
K40 ELECTRONICS K40 Platinum360 Owner'S Manual preview
K40 Platinum360
Brand: K40 ELECTRONICS Pages: 11

Brands by name

Popular brands

Load more brands