manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

GENERAL INFORMATION

WARNING

Driving while distracted can result in
loss of vehicle control, crash and injury.

We strongly recommend that you use
extreme caution when using any device that
may take your focus off the road. Your
primary responsibility is the safe operation
of your vehicle. We recommend against the
use of any hand-held device while driving
and encourage the use of voice-operated
systems when possible. Make sure you are
aware of all applicable local laws that may
affect the use of electronic devices while
driving.

You can control various systems on your
vehicle using the information display controls
on the steering wheel. The information
display provides the corresponding
information.

Information Display Controls

E170369

•

Press the up and down arrow buttons to
scroll through and highlight the options
within a menu.

•

Press the right arrow button to enter a
sub-menu.

•

Press the left arrow button to exit a menu.

•

Press and hold the left arrow button at
any time to return to the main menu
display (escape button).

•

Press the OK button to choose and
confirm settings or messages.

E204495

This icon gives you the ability to
switch a feature on or off. A check
in the box indicates the feature is

enabled, and unchecked indicates the
feature is disabled.

Main menu

From the main menu bar on the left side of
the information display, you can choose from
the following categories:

E138660

Trip 1 & 2

E144640

Fuel Economy

E144639

Driver Assist

E100023

Settings

108

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Information Displays

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Calira 811 Manual preview
811
Brand: Calira Pages: 14
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
ECS Electronics CR-066-BHU Manual preview
CR-066-BHU
Brand: ECS Electronics Pages: 16
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
E&G Classics Black Ice Mesh Instruction Manual preview
Black Ice Mesh
Brand: E&G Classics Pages: 4
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Brand: Jaeger Pages: 16
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Ford 2003 Mustang Workshop Manual preview
2003 Mustang
Brand: Ford Pages: 4378
Toyota 2013 Prius c Owner'S Manual preview
2013 Prius c
Brand: Toyota Pages: 549
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
Subaru S0A367010 Installation Instructions preview
S0A367010
Brand: Subaru Pages: 2
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10

Brands by name

Popular brands

Load more brands