10. ELECTRICAL SYSTEM
10-
5
Rectifier
Z
Check the rectifier whether it is
discolored, abnormal wear or
concave.
Abnormal wear or damage: →
Replace
Z
If the rectifier is discolored, grind it
with sanding paper, then wipe it
with a clean fabric.
Z
If there is concave, scrape off
insulator B, so that the distance
with A is d.
d≥1.5mm
Armature coil
Z
Test the connection between each
wire and the armature coil with the
multimeter.
Z
If they are not connected, replace
the armature shaft.
Oil seal
Z
Check the oil seal lip for damage or
leak.
Damage or leakage: →Replace the
starter motor.
Starter relay
Z
Inter-terminal voltage is 12V. Test
the direct connection of positive
and negative poles with the
multimeter.
Z
If the starter relay clicks and
connected, the starter relay is OK.
Z
When there is no voltage of 12V,
they are not connected, the starter
relay is OK.
Summary of Contents for UTV1000-3
