Liangzi Power UTV1000-3, Maintenance Manual

Page: 97 / 184

3.ENGINE
3- 69
INSPECTION
Inspect belt for cracks, fraying or abnormal wear.
Replace if necessary.
Drive belt width
Service limit 30.00mm(1.181 in)
Installation
For installation, reverse the removal procedure. Pay
attention to following details.
1. Word printed on belt
2. Drive pulley (front)
3. Driven pulley (rear)
4. Rotation direction
The maximum drive belt life span is obtained when the
drive belt has the proper rotation direction. Install it so
that the arrow printed on belt is pointing towards front
of the vehicle, viewed from top.
Install CVT cover gasket.
Install the center top screw in first.
Tighten the distance screw as per following sequence.
DRIVE PULLEY
1. Belt
2. Drive pulley(front)
3. Driven pulley(rear)
Removal

remove CVT cover and gasket.

Remove belt
Block the drive pulley as followed.