Liangzi Power UTV1000-3, Maintenance Manual, Page: 132 / 184

6.DRIVE TRAIN
6- 2
Inspection
Inspect the propeller shaft for wear or
damage. If any defects are found,
replace the propeller shaft with new
one.
Check if U-joint moves freely in all
direction.
Check bellows for holes or brittleness.
Installation
Installation is the reverse of removal procedure.
Ensure tighten the bolts to the specified torque.
Installation location Specifications (mm) Torque N.m(kgf.m)
Bolt of front propeller shaft flange M8 40(4.1)
Bolt of front propeller shaft flange M10 80(8.2)
FRONT WHEEL HUB
Removal
Raise the front of vehicle, support it securely on jack
stands and remove front wheel.
Remove cotter pin, castellated nut and belleville washer.
Remove the caliper from knuckle.
Pull the wheel hub to remove it.
Inspection
Check wheel hub for cracks or other damages.
Check inner splines and wheel rim bolts for wear or other
damages.
If any damage is detected on wheel hub, replace it with a
new one.
Installation