Liangzi Power UTV1000-3, Maintenance Manual

Page: 151 / 184

8.SUSPENSION SYSTEM
8- 5
Replace shock if any these conditions are found
Knuckle
Inspect the knuckle for damage. If any damages are
found, replace the knuckle with a new one.
Check bearing and seal for damage or wear, If any
damages or wear are found, replace a new one.
Rotate the inner race by hand to inspect for abnormal
noise and smooth rotation
Lower Suspension Arm
Inspect the suspension arm and for damage or
distortion. If any damages or distortion are found,
replace the suspension arm with a new one.
Move suspension arm from side to side. There should
be no noticeable loose. Replace bushing if necessary.
Move suspension arm up and down.There should be
no noticeable loose. Replace bushing if necessary.
Upper Suspension Arm
Inspect the suspension arm and for damage or
distortion. If any damages or distortion are found,
replace the suspension arm with a new one.
Move suspension arm from side to side. There
should be no noticeable loose. Replace bushing if
necessary.
Move suspension arm up and down.There should be
no noticeable loose. Replace bushing if necessary.
REASSEMBLY
Reassemble and remount the rear suspension in the reverse order of removal and disassembly. Pay
attention to lubricate rear knuckles with lithium-soap based grease.