Liangzi Power UTV1000-3, Maintenance Manual

Page: 129 / 184

5.FUEL SYSTEM
5- 5
Remove fuel pump retaining screws and hoops.
Remove the bolts of fuel tank retaining.
Pull front side of the fuel tank upward,
continue lifting movement until you can
remove the fuel tank completely.
Fuel tank inspection
Inspect fuel tank for any damage or cracks which may result in fuel leaks. If so replace tank with a
new one. Inspect tank and protector attachment points for damage. Inspect protector for damage.
Fuel tank installation
For installation, reverse the removal
process but pay attention to the
following.
Reconnect fuel pump connector and fuel hose.
Tighten retaining screws.
Refuel tank and ensure there are no leaks.
Fuel pump installation
For installation, reverse the removal process but pay attention to the following.
Install a new gasket.
Pay attention to pump orientation.
Tighten retaining screws as per illustrated sequence.
Install hose properly on OUT nipples and harness.
FUEL TANK
Fuel tank draining
Never perform this operation when the engine and/or the exhaust system is/are hot.
Never sue a hose pincher on injection system high pressure hoses.
Remove fuel tank cap and siphon gas in an approved fuel container.
Fuel tank removal
Remove
Disconnect vent line from body.
Fuel tank inspection
Inspect fuel tank for any damage or cracks which may result in fuel leaks. If so replace tank with a
new one. Inspect tank and protector attachment points for damage. Inspect protector for damage.
Fuel tank installation
front
rear