manualshive.com logo in svg

TrailMax TD-40-T, Manual

The TrailMax TD-40-T manual is available for free download on manualshive.com, providing comprehensive instructions for operating and maintaining this exceptional product. This user-friendly manual ensures smooth navigating experiences, maximizing your satisfaction with the TD-40-T. Discover all the details and download it now to elevate your trail adventures.

Share
Download
background image

page 1

TD-40-T

®

Table of Contents

Section 1. Operation .................................................................................... 3

1.0 Introduction .......................................................................... 3
1.1 Purpose ............................................................................... 3
1.2 Rating .................................................................................. 3
1.3 Design and Safety Factors .................................................. 4
1.4 Vehicle Load and Handling Limits ....................................... 4
1.5 Alert Symbols ...................................................................... 7
1.6 Uncaging Air Brakes ............................................................ 8
1.7 Reporting Safety Defects ................................................... 10
1.8 Pre-Trip Inspection ............................................................ 11
1.9 Hook-Up Procedures ......................................................... 12
1.10 Loading and Unloading ..................................................... 13

Trailers With Ramps ........................................................ 14
Trailers With Tilt Decks ..................................................... 14
Securing Loads With Chains ............................................ 15

Section 2. Maintenance .............................................................................. 17

2.0 Periodic Maintenance......................................................... 17
2.1 Structural Components ....................................................... 18

Sub-Frame ....................................................................... 18
Deck ................................................................................ 18

2.2 Sub-Assembly Components ............................................... 18

Drawbar Eye .................................................................... 18
Binkley Jack ..................................................................... 19
Cushion Cylinder .............................................................. 19
Deck Latch ....................................................................... 19
Deck Hinge Assembly ...................................................... 19

2.3 Rear Impact Guard (RIG) .................................................... 20
2.4 Running Gear ..................................................................... 21

Suspension ...................................................................... 21
Axle Alignment .................................................................. 23
Axle End Component Disassembly ................................... 23
Hub Inspection .................................................................. 23
Broken or Damaged Studs ............................................... 23
Brake Drum Inspection ..................................................... 24
Brake Drum Troubleshooting Chart ................................... 25
Brake Drum Troubleshooting Chart (continued) ................. 26
Axle End Component Cleaning and Inspection .................. 27
Axle End Component Assembly ........................................ 27
Wheel Bearing Adjustment ................................................ 27

Table of Contents

Rev. F 06/01/05

Summary of Contents for TD-40-T































































Reviews:

No comments

Related manuals for TD-40-T

Yamaha Grizzly Owner'S Manual preview
Grizzly
Brand: Yamaha Pages: 176
Polaris RANGER XP 900 Owner'S Manual For Maintenance And Safety preview
RANGER XP 900
Brand: Polaris Pages: 147
Baja motorsports WD250UR Owner'S Manual preview
WD250UR
Brand: Baja motorsports Pages: 82
Razor DIRT QUAD 25117460 Owner'S Manual preview
DIRT QUAD 25117460
Brand: Razor Pages: 12
LAMAX eFalcon ATV50M User Manual preview
eFalcon ATV50M
Brand: LAMAX Pages: 150
gio Vyper 4WD 1100cc 4 seater XY1100UEL Service Manual preview
Vyper 4WD 1100cc 4 seater XY1100UEL
Brand: gio Pages: 261
Can-Am 2009 Renegade 500 Operator'S Manual preview
2009 Renegade 500
Brand: Can-Am Pages: 148
Yamaha ET250D Supplementary Service Manual preview
ET250D
Brand: Yamaha Pages: 17
Yamaha ET250 Manual preview
ET250
Brand: Yamaha Pages: 22
Yamaha BREEZE Owner'S Manual preview
BREEZE
Brand: Yamaha Pages: 156
Yamaha BLASTER YFS200P Owner'S Manual preview
BLASTER YFS200P
Brand: Yamaha Pages: 156
Yamaha BLASTER YFS200N Owner'S Manual preview
BLASTER YFS200N
Brand: Yamaha Pages: 153
Yamaha BLASTER Owner'S Manual preview
BLASTER
Brand: Yamaha Pages: 153
Yamaha BIGBEAR 250 Owner'S Manual preview
BIGBEAR 250
Brand: Yamaha Pages: 155
Yamaha BIG BEAR YFM400S Owner'S Manual preview
BIG BEAR YFM400S
Brand: Yamaha Pages: 171
Yamaha BR250F Service Manual preview
BR250F
Brand: Yamaha Pages: 191
HYOSUNG WOW 50 Service Manual preview
WOW 50
Brand: HYOSUNG Pages: 133
Yamaha FXNytro FX10RTRSZ Owner'S Manual preview
FXNytro FX10RTRSZ
Brand: Yamaha Pages: 92

Brands by name

Popular brands

Load more brands