Liangzi Power UTV1000-3, Maintenance Manual

Page: 131 / 184

6.DRIVE TRAIN
6- 1
6. DRIVE TRAIN
FRONT DRIVE
FRONT PROPELLER SHAFT
Removal
Place vehicle on PARK position and select 4WD.
Remove left and right seats, gear shift handle and engine
shield.
Unscrew propeller shaft bolt on engine side.
Loosen the right front wheel nut.
Raise the front of vehicle, support it securely on jack stands.
Remove the right front wheel and the ball joint of tie rod
from the steering knuckle.
Remove propeller shaft bolts on front differential side.
FRONT DRIVE ········································· 6-1
FRONT PROPELLER SHAFT ···················· 6-1
FRONT WHEEL HUB ······························ 6-2
FRONT DRIVE SHAFT ···························· 6-3
FRONT DIFFERENTIAL ·························· 6-4
REAR DRIVE ··········································· 6-5
REAR WHEEL HUB ································ 6-6
REAR DRIVE SHAFT ······························ 6-7
REAR PROPELLER SHAFT ······················ 6-7
REAR DIFFERENTIAL ···························· 6-9
TIRES AND WHEELS...........................................6-10