Liangzi Power UTV1000-3, Maintenance Manual, Page: 141 / 184

6.DRIVE TRAIN
6- 11
Apply tire lubricant to the new tire bead
and the flange of the rim. But never apply
grease, oil or gasoline to the tire bead
because they will deteriorate the tire.
CAUTION
Mount the new tire on the rim.
CAUTION
Inflate the tire to seat the tire bead.
Check the rim line cast on the tire side
walls. It must be equidistant from the
wheel rim all the way around. If the
distance between the rim line and the
wheel rim varies this indicates that the
bead is not properly seated. If this is so,
deflate the tire completely, and unseat the
tire bead on bosh sides. Then coat the
bead with clean water and re-seat the tire.
Adjust the tire pressure to specification.
The standard tire fitted on this vehicle is
AT29×8–15 for the front and AT29×10–15 for
the rear.
The use of tires other than the standard may
cause instability. It is highly recommended to
use the specified tire.
Inspect the sealing portion of the rim for
contamination and distortion before installing
the tire on the rim.
When installing each tire, make sure the arrow
on the tire points in the direction of rotation. Also
make sure the outer side of the wheel rim is facing
outward.