Liangzi Power UTV1000-3, Maintenance Manual

Page: 18 / 184

2.PERIODIC MAINTENANCE
2- 8
Check the spark plug heat range by
observing the electrode color. If the
electrode of the spark plug is appearing
wet or dark color, replace the spark plug
with a hotter type one. If it is white or
appearing glazed, replace the spark plug
with a colder type one.
Standard type: DCPR8E / NGK
Colder type: DCPR9E / NGK
Hotter type: DCPR7E / NGK
CAUTION
THROTTLE CABLE PLAY
Before starting the engine, check the gas pedal to be sure it is operating correctly. Make sure the
gas pedal fully returns to the idle position as soon as it is released.
Check the free play and adjust if needed. Press the throttle to make sure it moves smoothly
without sticking and snaps back automatically when it is released Check to see that the gas pedal
operates correctly. It must operate smoothly and fully spring back to the idle position when
released. Have a dealer repair if necessary for proper operation.
Check throttle pedal free play: 3 - 5mm
In case of out of range: → adjustment
Remove left and right seats, gear shift
handle and engine shield.
Loose throttle cable (bracing cable).Turn adjuster to
adjust free play of throttle pedal.
After adjustment, tighten nut.
If free play after adjustment cannot reach designated
requirement or there is viscosity for throttle valve,
replace it with new throttle cable.
In order to avoiding damaging cylinder cap thread, firstly use hands to tighten spark plug and then use
spark plug wrench to tighten cylinder cap with designated torque.