Liangzi Power UTV1000-3, Maintenance Manual

Page: 135 / 184

6.DRIVE TRAIN
6- 5
Inspection
Inspect the gear case, case cover, bearing, oil seals and dust seal for wear or damage. If any
damage or wear is found, replace the oil seal or dust seal with a new one.
Check back lash and drag torque.
Check the breather rubber case for wear or damage. Also, check that the joint of rubber case fits
tightly.
Installation
The installation is the reverse of the removal procedure. Pay attention to refill the oil (GL-4-90).
Ensure tighten the bolts to the specified torque.
Installation location Specifications (mm) Torque N.m(kgf.m)
Mounting nut of wheel rim M10
60(6.1)
Nut of wheel hub M22 300(30.6)
Fastening nut of front differential M10 80(8.2)
Bolt of front propeller shaft flange M8 40(4.1)
Bolt of front propeller shaft flange M10 80(8.2)
REAR DRIVE