Kinroad XT400ATV User Manual Download

Page: 1 / 38

USER MANUAL

XT400ATV

This operating manual includes important safety and maintenance information.When

reselling the ATV to the next buyer,the operation manual should be passed on together with

it because the next user also need the manual .Please read the manual carefully before

driving the new JUNMA 300 ATV. If failed to conform the requirements described in the

manual, it will be easy to cause inuries and deaths

Warning

Read this manual carefully and follow the operating procedures and methods

described in this manual

Never operate an ATV without proper training or instruction

A child under 16 years old should never operate an ATV. Never allow drive of an ATV

by and individal person if he or she does not have the abilites to operate it safely.

Warning:

Injury or death could be result from failare to follow WARNING instructions when you are

operating, inspecting or repairing the ATV.

Always avoid driving and ATV on any paved surfaces, including side walks, parking

lots and streets.

Summary of Contents for XT400ATV







































Search results

Summary of Contents for XT400ATV

Reviews:

Related manuals for XT400ATV

Brands by name

Popular brands

Kinroad XT400ATV, User Manual

Search results

Summary of Contents for XT400ATV

Reviews:

Related manuals for XT400ATV

Brands by name

Popular brands