Liangzi Power UTV1000-3, Maintenance Manual

Page: 21 / 184

2.PERIODIC MAINTENANCE
2- 11
CAUTION
Replace gearbox oil
Prior to change the gearbox oil, ensure vehicle is on a level surface, should be done with a
warm engine.
1. Ensure vehicle is on a level surface.
2. Drive vehicle for a few minutes.
3. Stop engine and wait a few minutes.
4. Remove left and right seats, gear shift
handle.
5. Remove engine shield
6. Remove the oil level check plug.
7. Place an oil pan under the gearbox case,
and then drain oil completely by removing
the drain plug.
8. Tighten the drain plug to 20 N.m.
9. Pour the specified oil(GL-4-90) about
420mL by syringe through the oil level
check plug hole until the oil over flows.
10. Tighten the oil level check plug to 20 N.m.
FRONT DIFFERENTIAL OIL
To change the front differential oil, locate the
vehicle on a level position and carry out the
following steps.
Clean the oil level check plug area and remove
the oil level check plug.
In order to expand service life of vehicle, please use grade SJ standard engine
oil conforming to API with its viscosity indication being SAE10W/40. If viscosity
of engine does not reach SAE 10W/40, make corresponding selection according to
drawing
Oil level
check plug
Oil level
check plug
Drain Plug