background image

704 000 000

Read this guide thoroughly.
It contains important safety information.

Minimum recommended operator age:
16 years old.

WARNING

THIS VEHICLE CAN BE HAZARDOUS TO OPERATE.
A collision or rollover can occur quickly, even during
routine manoeuvers such as turning and driving on hills
or over obstacles, if you fail to take proper precautions.

SEVERE INJURY OR DEATH can result if
you do not follow these instructions:

• BEFORE YOU OPERATE THIS ATV, READ THE

OPERATOR’S GUIDE, THE SAFETY HANDBOOK
AND ALL LABELS.

•  NEVER OPERATE THIS ATV, WITHOUT PROPER

INSTRUCTION. Beginners should complete a
certified training course.

• NEVER CARRY A PASSENGER. You increase

your risk of losing control if you carry a passenger.

• NEVER OPERATE THIS ATV ON A PAVED

SURFACE. You increase your risk of losing control
if you operate this ATV on pavement.

• NEVER OPERATE THIS ATV ON PUBLIC ROADS.

You can collide with another vehicle if you operate
this ATV on a public road.

• ALWAYS WEAR AN APPROVED HELMET,

eye protection, and protective clothing.

• NEVER CONSUME ALCOHOL OR DRUGS

before or while operating this vehicle.

• NEVER OPERATE THIS ATV AT EXCESSIVE

SPEEDS. You increase your risk of losing control
if you operate this ATV at speeds too fast for the
terrain, visibility conditions, or your experience.

• NEVER ATTEMP WHEELIES, JUMPS, OR OTHER

STUNTS.

WARNING

VMO99.FH7

11/11/98 

PHOTO X:FINAUX\1999\VTT\COVER99\VMO\VMO99.EPS
N/P 704 000 000 = English
N/P 704 000 001 = Français

Summary of Contents for 1999 Traxter

















































































Reviews: