Liangzi Power UTV1000-3, Maintenance Manual, Page: 128 / 184

5.FUEL SYSTEM
5- 4
device, locating floating device to see
whether it is
fit with indication of fuel meter.
Turn off the ignition switch and disconnect connector,
measure resistance:
Lower: BLUE/WHITE: 6-9Ω
Lift: BLUE/WHITE: 90-95Ω
If the resistance is not within empty and full values, replace
fuel pump module. If the fuel level sensor is good, try a
new multifunction gauge.
Installation
Install fuel sensor to fuel tank.
Connect connector and hose.
Turn on fuel supply switch, and check whether functions of fuel meter is normal or not.
Fuel leakage is not allowed.
FUEL TANK
Fuel tank draining
Never perform this operation when the engine and/or the exhaust system is/are hot.
Remove fuel tank cap and siphon gas in an approved fuel container.
Fuel tank removal
Remove the right guard.
Remove the mounting plate of seat.
Remove the rear body guard (right).
Disable fuel pump by removing the electrical connector from the fuel
pump.
Remove fuel pump outlet hose.