Kyocera TASKalfa 3500i Operation Manual Download Page 477

Page: 477 / 572

Troubleshooting

12-9

When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.

Error Message

Checkpoints

Corrective Actions

Reference

Page

Cannot punch at the
specified position.

Have you selected a
position that cannot be
punched?

If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.

3-20

Cannot punch this
paper.

Did you select a paper size/
type that cannot be
punched?

If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.

3-20

Cannot staple at the
specified position.

Have you selected a
position that cannot be
stapled?

If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.

—

Cannot staple this
paper.*

Did you select a paper size/
type that cannot be stapled?

If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.

—

Cannot use ##### due
to a failure.

—

Call service.

—

Check the document
processor.

Is the document processor
open?

Close the document processor.

—

Is the top cover of the
document processor open?

Close the document processor cover. —

Check the folder
setting at the PC.

Is the machine connected to
the network?

Make sure that the machine is
connected to the network.

2-3

Is the PC to which the
scanned image is to be sent
connected to the network?

Make sure that the destination PC is
connected to the network.

2-3

Has the setting of the
shared folder to which the
scanned image is to be sent
been changed?

Return the setting for the destination
shared folder to the previous setting.

3-29

Is the account information
(user ID, password) used to
access the shared folder to
which the scanned image is
to be sent incorrect?

Enter the correct user ID and
password. For a domain
environment, the domain name must
be specified.
[User ID]@[Domain Name]
Example: sa720XXXX@km

—

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands