Kyocera TASKalfa 3500i, Operation Manual

Page: 526 / 572

Appendix-6
Folding Unit
Folds printed output at the center or in tri-fold to enable the creation of simple booklets. Installs on the 4,000-
sheet finisher.
Inner Job Separator
Separate paper according to output tray for easier sorting. Specify as the output tray for copy or print jobs. Or,
specify as the default output tray for printing from the copy or Document Box screen, printing from the PC, and
printing of the received fax data.
CAUTION:
Note that some paper types have a tendency to curl and may jam in the paper eject unit.
If the ejected paper slips or stacks unevenly, turn the paper in the cassette over and try again.
NOTE:
• To ensure that paper is delivered to the Inner Job
Separator, select the output destination or change
the default setting. (For details, refer to the
Paper
Output on page 9-15 .)
• When removing paper from the Inner Job
Separator, pull it out at an angle.
Inner Job Separator (JS-732)
Separate paper according to output tray for easier sorting. Specify as the output tray for copy or print jobs. Or,
specify as the default output tray for printing from the copy or Document Box screen, printing from the PC, and
printing of the received fax data.
CAUTION:
Note that some paper types have a tendency to curl and may jam in the paper eject unit.
If the ejected paper slips or stacks unevenly, turn the paper in the cassette over and try again.
NOTE:
• To ensure that paper is delivered to the Inner Job
Separator, select the output destination or change
the default setting. (For details, refer to the
Paper
Output on page 9-15 .)
• If the paper is A3, B4, Ledger, or Legal, pull out the
auxiliary tray.
• The busy light stays on until the output is removed
from the Inner Job Separator. You can set whether
sleep mode is entered after a certain period of time
when in this state in the system menu. (For details,
refer to
Sleep Act. (Job Separator) on page 9-80 .)