Kyocera TASKalfa 3500i Operation Manual Download Page 388

Page: 388 / 572

Default Setting (System Menu)

9-88

Internet

This procedure sets up the Internet browser application. You can specify the following Internet browser settings.

• Internet Browser Setting
• Browser Preferences
• Proxy Settings

Internet Browser Setting

This selects whether or not the Internet browser is used.

Use the procedure below to specify the Internet browser setting.

Press the

System Menu

key.

Press [ ] and then [Internet].

NOTE:

If the user authentication screen appears, enter your login user name and password and then press

[Login]. For this, you need to login with administrator privileges. Refer to

Adding a User (Local User List) on

page 10-5

for the default login user name and password.

Press [Change] of

Internet Browser

Press [On] or [Off].

Press [OK].

Browser Preferences

This specifies Internet browser preferences such as your home page setting and how pages are displayed.

NOTE:

This is not displayed if you selected

Off

Internet Browser Setting

(page 9-88)

Use the procedure below to set your Internet browser preferences.

Press the

System Menu

key.

Press [ ] and then [Internet].

NOTE:

If the user authentication screen appears, enter your login user name and password and then press

[Login]. For this, you need to login with administrator privileges. Refer to

Adding a User (Local User List) on

page 10-5

for the default login user name and password.

Press [Next] of

Browser Environment

To set your home page, press [Change] of

Home Page

, press [URL], enter the URL and then press [OK].

Press [OK] again.

NOTE:

Refer to the

Character Entry Method on page Appendix-9

for details on entering characters.

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands