Kyocera TASKalfa 3500i Operation Manual Download Page 386

Page: 386 / 572

Default Setting (System Menu)

9-86

Select a One Touch Key number (0001 to 1000) for the destination, and press [Add/Edit]. Pressing

Quick

No. Search

key or [No.] enables direct entry of a One Touch Key number.

Select a One Touch Key with no registered destination.

Press [Change] of

Display Name.

Enter the One Touch Key name (up to 32 characters) displayed in the send base screen, and press [OK].

NOTE:

Refer to the

Character Entry Method on page Appendix-9

for details on entering characters.

Press [Change] of

Destination

. The address book appears.

Select a destination (contact or group) to add to the One Touch Key number, and press [OK].

Pressing [Detail] shows the detailed information of the selected destination.

NOTE:

Destinations can be sorted or searched by destination name or address number. Refer to

Specifying

Destination on page 3-39

for Address List.

Press [Save]. The destination will be added to the One Touch Key.

Editing One Touch Key

Edit/delete the destinations you added to One Touch Key.

Use the procedure below to edit the One Touch key.

Press the

System Menu

key.

Press [Edit Destination] and then [Add/Edit] of

One Touch Key.

Select a One Touch Key number (0001 to 1000) for the destination. Pressing

Quick No. Search

key or [No.]

enables direct entry of a One Touch Key number.

The procedure differs depending on the details to be edited.

Changing the Registered Information

Press [Add/Edit].

Select a new destination (Contact or group). Pressing [Detail] shows the detailed information of the
selected destination.

NOTE:

Destinations can be sorted or searched by destination name or address number. Refer to

Specifying Destination on page 3-39

for Address List.

Press [OK].

Press [Yes] on the screen to add the destination to the One Touch Key.

Deleting the Registered Information

Press [Delete].

Press [Yes] on the screen to confirm the deletion of the data registered in the One Touch Key.

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands