Kyocera TASKalfa 3500i Operation Manual Download Page 315

Page: 315 / 572

Default Setting (System Menu)

9-15

Use the procedure below to specify the settings for error handling.

Press the

System Menu

key.

Press [Common Settings] and then [Next] of

Error Handling

Press [Change] at the error for which you wish to change the handling.

Select the error handling method in the selection screen for each of the errors and then press [OK].

The previous screen appears. To set the handling for a different error, repeat steps 3 and 4.

Paper Output

Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.

NOTE:

The optional inner job separator, right job separator, 1,000-sheet finisher, and 4,000-sheet finisher are

required.

When [Heavy 3] (164 g/m

- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output

destination, the output destination is automatically changed to a tray that can be used.

FAX RX data output can be specified when the optional fax kit is installed.

IMPORTANT:

If you want to enable the changed defaults immediately, move to the function screen and press

the

Reset

key.

Use the procedure below to select the output tray.

Press the

System Menu

key.

Press [Common Settings] and then [Next] of

Paper Output

Press [Change] of

Copy/Custom Box

Printer

, or

FAX Port 1

FAX Port 2

NOTE:

FAX Port 1

appears when the optional fax kit is installed.

If you have 2 optional fax kits installed,

Fax Port 2

appears. You can specify the output tray for the second kit

(Dual FAX).

Select the Output Tray.

Output Tray

Descriptions

Inner Tray*

This cannot be selected when the optional document finisher is installed.

Delivery on the Inner Tray of the machine.

Tray A, Tray B, Tray C

Delivery to trays A - C of the optional 4,000-sheet finisher.

Finisher Left Tray
Finisher TOP Tray

Delivery to the left tray or top tray of the optional 1,000-sheet finisher.

Right Tray

Delivery to the optional right job separator.

Job Separator Tray*

Delivery to the optional inner job separator.

Tray 1 to 7

Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray).

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands