Kyocera TASKalfa 3500i, Operation Manual

Page: 276 / 572

Document Box
7-18
Repeat Copy
Repeat Copy Job Retention
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Use the procedure below to specify the maximum number of stored jobs.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of
Job Box , [Change] of Repeat Copy Job
Retention .
3
Use the [+] and [–] keys or the numeric keys to
enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
NOTE:
If you enter a value of 0 (zero), no jobs are
stored.
4
Press [OK]. The maximum number of stored jobs is
set.
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below to print a document.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
4
Select the document to print and press [Print].
5
If the document is protected by a password, enter
the password using the numeric keys.
6
Press [Start Print] to start printing.
The Repeat Copy box job will be deleted when the
main power switch is turned off.
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
(0 - 50)
32
Cancel OK
Status
job(s)
10/10/2010 10:10
Name Date and Time Size
2008101000101002 10/10/2010 10:10
001/001
Detail
Print
Close
Delete
Repeat Copy
MB 21
Status
10/10/2010 10:10