Kyocera TASKalfa 3500i, Operation Manual

Page: 344 / 572

Default Setting (System Menu)
9-44
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed. The table below shows the available settings.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to specify the automatic zoom priority.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto % Priority .
3
Select the default for [Off] or [On].
4
Press [OK].
Reserve Next Priority
Select the operation of the reserve copy and interrupt copy functions and for canceling jobs.
Use the procedure below to select the default
Reserve Next Priority setting.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Reserve Next Priority .
3
Select the default for [Off] or [On].
4
Press [OK].
Paper Size for Small Original
Specify the paper size to be used for a case where the original is too small to be detected in the Auto Paper
Selection mode.
The procedure is as follows.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Paper Size for Small Original .
3
Select the paper size.
The following paper sizes can be selected:
Default Paper Source, A4, A4-R, A5-R, A6-R, B5, B5-R, B6-R, Letter, Letter-R, Statement-R
4
Press [OK].
5
Move to the copy screen and press the Reset key.
Item Description
Off No zoom performed (copied in original size).
On Automatic zoom performed as appropriate.