Kyocera TASKalfa 3500i Operation Manual Download Page 472

Page: 472 / 572

Troubleshooting

12-4

Paper often jams.

Is the paper loaded
correctly?

Load the paper correctly.

2-28

—

Change the orientation in which the
paper is positioned.

xl
2-28
2-35

Is the paper of the supported
type? Is it in good condition?

Remove the paper, turn it over, and
reload it.

2-28

Is the paper curled, folded or
wrinkled?

Replace the paper with new paper.

2-28

Are there any loose scraps or
jammed paper in the
machine?

Remove any jammed paper.

12-21

Printouts have black
lines.

Are the slit glass and the
Dual scanning area dirty?

Clean the slit glass and the Dual
scanning area.

11-16

Printouts are wrinkled
or curled.

Is the paper separator of the
paper feed unit dirty?

Clean the paper separator.

11-19

Is the paper damp?

Replace the paper with new paper.

2-27

—

Change the orientation in which the
paper is positioned.

xl
2-28
2-35

Cannot print.

Is the machine plugged in?

Plug the power cord into an AC
outlet.

—

Is the machine powered on?

Turn on the main power switch.

3-2

Are the printer cable and
network cable connected?

Connect the correct printer cable
and network cable securely.

2-3

Was the machine powered
on before the printer cable
was connected?

Power on the machine after
connecting the printer cable.

2-3

Is the print job paused?

Resume printing.

8-3

Documents are
printed improperly.

Are the application software
settings at the PC set
properly?

Check that the printer driver and
application software settings are
set properly.

—

Cannot print with USB
memory.
USB memory not
recognized.

Is the USB host blocked?

Select [Unblock] in the USB host
settings.

9-107

—

Check that the USB memory is
securely plugged into the machine.

—

Symptom

Checkpoints

Corrective Actions

Reference

Page

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands