Kyocera TASKalfa 3500i Operation Manual Download Page 317

Page: 317 / 572

Default Setting (System Menu)

9-17

Original Image (Copy)

Select the default original document type for copying. The available default settings are shown below.

Use the procedure below to select the default quality setting for originals.

Press the

System Menu

key.

Press [Common Settings], [

], [Next] of

Function Defaults

and then [Change] of

Original Image (Copy)

Select the default original document type.

Press [OK].

Org. Image (Send/Store)

Select the default original document type for sending and storing in a document box. The available default
settings are shown below.

Use the procedure below to select the default quality setting for originals.

Press the

System Menu

key.

Press [Common Settings], [

], [Next] of

Function Defaults

and then [Change] of

Org. Image (Send/Store)

Select [Text+Photo], [Photo], [Text] or [Text (for OCR)] for the default.

Press [OK].

Item Description

Text+Photo (Printer)

For mixed text and photo documents printed on this machine
originally.

Text+Photo (Magazine)

For mixed text and photos printed in a magazine, etc.

Photo (Printer)

For photos printed on this machine originally.

Photo (Magazine)

For photos printed in a magazine, etc.

Photo (Photo Paper)

For photos taken with a camera.

Text

Sharply renders pencil text and fine lines.

Text (Fine Line)

Graphic/Map (Printer)

For maps and diagrams printed on this machine originally.

Graphic/Map (Magazine)

For maps and diagrams printed in a magazine.

Item Description

Text+Photo

Text and photos together.

Photo

For photos taken with a camera.

Text

Sharply renders pencil text and fine lines.

Text (for OCR)

Image quality suitable for OCR software.

Summary of Contents for TASKalfa 3500i





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands

Kyocera TASKalfa 3500i, Operation Manual

Search results

Summary of Contents for TASKalfa 3500i

Reviews:

Related manuals for TASKalfa 3500i

Brands by name

Popular brands