Kyocera ECOSYS FS-3140MFP Operation Manual Download | Manualshive

Page: 21 / 435

background image

xix

Warranty (USA)

FS-3040MFP/FS-3140MFP

MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY

Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”) warrant
the Customer’s new Multifunctional Product (referred to as “MFP”), and the new accessories
installed with the initial installation of the MFP, against any defects in material and workmanship for
a period of one (1) year, or 300,000 copies/prints from date of installation, whichever first occurs. In
the event the MFP or an accessory is found to be defective within the warranty period, Kyocera’s
only obligation and the Customer’s exclusive remedy shall be replacement of any defective parts.
Kyocera shall have no obligation to furnish labor.

This warranty is valid only for the original retail purchaser (referred to as the “Customer”) of a new
Kyocera MFP in the United States of America or Canada, based upon the country of purchase.

In order to obtain performance of this warranty, the Customer must immediately notify the Authorized
Kyocera Dealer from whom the product was purchased. If the Kyocera Dealer is not able to provide
service, write to Kyocera at the address below for the name and address of the Authorized Kyocera
Dealer in your area or check Kyocera’s website at www.kyoceramita.com/us.

This warranty does not cover MFP’s or accessories, which: (a) have become damaged due to
operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress,
(b) have used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have
been installed or serviced by a technician not employed by Kyocera or an Authorized Kyocera
Dealer, or (d) have had the serial number modified, altered, or removed.

This warranty does not cover Maintenance Kits or the components of Maintenance Kits, which
consist of the developing unit, the drum unit, the transfer roller, the fixing unit and the feed roller unit,
which have a separate warranty.

This warranty gives the Customer specific legal rights. The Customer may also have other rights,
which vary from state to state, or province to province. Neither the seller, nor any other person, is
authorized to extend the time period or expand this warranty on behalf of Kyocera.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS,
EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY
OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR
INABILITY TO USE, THE MFP.

Downloaded From ManualsPrinter.com Manuals

«
...
19
20
21
22
23
...
»

Summary of Contents for ECOSYS FS-3140MFP




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ECOSYS FS-3140MFP

Brand: Oki Pages: 6

Brand: Oki Pages: 44

Brand: Oki Pages: 13

Brand: Oki Pages: 20

Brand: Oki Pages: 2

Brand: Oki Pages: 28

Brand: TASKalfa Pages: 36

Brand: Oki Pages: 28

Brand: Oki Pages: 22

image RUNNER 3045

Brand: Canon Pages: 14

Brand: Oki Pages: 512

Brand: QuickLabel Systems Pages: 122

Brand: Lexmark Pages: 9

VarioPrint 6180

Brand: Oce Pages: 306

Brand: Ricoh Pages: 236

DocuPrint C3300 DX

Brand: Xerox Pages: 200

Brand: Kashino Technology Pages: 72

Brand: Konica Minolta Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands