Kyocera ECOSYS FS-3140MFP Operation Manual Download

Page: 105 / 435

3-19

Basic Operation

Send as E-mail

Sends a scanned original image as an E-mail attachment.

NOTE:

• You must have a network environment in which this machine can connect to a mail server. It is recommended

that the machine be used in an environment in which it can connect to the mail server at any time over a LAN.

• Access the COMMAND CENTER beforehand and specify the settings required for sending e-mail. For details,

see

COMMAND CENTER (Settings for E-mail) on page 2-28

• Refer to

Character Entry Method on Appendix-5

for details on entering characters.

Press the

Send

key.

Displays the screen for sending.

Press the

key to select [E-mail].

Press the

key. Address Entry appears.

Enter the destination e-mail address.

NOTE:

Destination can be specified using the Address

Book or the One-touch keys. Refer to

Specifying

Destination on page 3-26

Press the

key.

Completed.

is displayed and the

screen returns to the basic screen.

NOTE:

If the screen for confirming the entry of a new

destination (

page 8-87

) is set to [On], a screen to confirm the

entered e-mail address appears. Enter the same e-mail
address again and press the

key.

If there are additional destinations, press the

Add

Destination

key. Repeat steps 2 to 5 to enter additional

destinations. Up to 100 destinations can be specified.

Send to:

*********************

Folder(SMB)

Folder(FTP)

E-mail

Address Entry:

ABC

[ Text

]

Ready to send.

Dest.: 1

:sally@###########

1-sided 300x300dpi
[ Duplex ] [ScanRes.]

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for ECOSYS FS-3140MFP




















































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands

Kyocera ECOSYS FS-3140MFP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands