Kyocera ECOSYS FS-3140MFP Operation Manual Download

Page: 111 / 435

3-25

Basic Operation

Confirm Destination Screen

If the screen for confirming the destination before transmission (

page 8-87

) is set to [On],

Check through the all

destination and press [Next].

appears when the

Start

key is pressed.

Use the procedure below to operate the Confirm Destination screen.

Press the

key to check all destinations.

Press the

key to edit or delete the selected

destination.

To add a destination, press [Cancel] (the Left Select key)
to return to the previous screen.

After the checking is finished, press [Next] (the

Right

Select

key).

Set original and press Start key.

is displayed

on the screen.

If there are destinations that are hidden and not yet
checked, the screen displays

Check the destination list

through the end.

and returns to the Destination List

screen. Check all destinations.

Place the original on the platen and press the

Start

key.

Transmission starts.

Destination List:

*********************

0667640000

0667741234

[ Cancel ] [ Next ]

Morgan@###########

Morgan@########

Detail

Delete

Set original
and press Start key.

[ Cancel ]

Check the destination
list through the end.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for ECOSYS FS-3140MFP




















































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands

Kyocera ECOSYS FS-3140MFP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands