Kyocera ECOSYS FS-3140MFP Operation Manual Download

Page: 139 / 435

5-5

Sending Functions

Zoom

Scans the original by automatically zooming it depending on the sending size.

The table below lists the available options.

NOTE:

When zooming in or out, see

Sending Size on page 5-3

when selecting the sending size.

When Custom Size or

Size Entry

is selected as the original size, the originals are sent at normal size and zooming

cannot be used.

Depending on the combination of original size and sending size, the image is placed at the edge.

Use the procedure below to enlarge or reduce the original to match the transmission size.

Press the

Send

key.

Place the original.

Select the transmission size.

Press the

Function Menu

key. Function Menu appears.

Press the

key to select [Zoom].

Press the

key. Zoom appears.

Press the

key to select [100%] or [Auto] and then

press the

key.

Completed.

is displayed and the screen returns to the

basic screen for sending.

Specify the destination, and press the

Start

key to start

sending.

Item

Detail

100%

No Zoom (to be scanned at actual size)

Auto

Zoomed automatically according to the specified
sending size.

Function Menu:

*********************

Original Size

Original Image

[ Exit

]

Color Selection

Zoom:

*********************

Auto

*100%

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for ECOSYS FS-3140MFP




















































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands

Kyocera ECOSYS FS-3140MFP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-3140MFP

Reviews:

Related manuals for ECOSYS FS-3140MFP

Brands by name

Popular brands