Kubota M9540, Workshop Manual

Page: 72 / 619

G-53
M8540, M9540, WSM G GENERAL
Timer Gear Puller
Application: Use for removing the timer gear from governor shaft.
W1040379
Timer 0
°
Restoring Jig
Application: Use for restoring 0
°
in the timer gear.
W1040485
A 27 mm (1.1 in.)
B 130 mm (5.12 in.)
C 15 mm (0.59 in.)
D 115 mm (4.53 in.)
E 26 mm dia. (1.0 in. dia.)
F 0.8 mm radius (0.03 in. radius)
G Chamfer 1 mm (0.04 in.)
H Less than 3 mm (Less than 0.1 in.)
I M14 x Pitch 1.5
J 0.52 rad (30
°
)
K 32 mm (1.3 in.)
L M14 x Pitch 1.5
M 45 mm (1.8 in.)
N 30 mm (1.2 in.)
O 15 mm (0.59 in.)
P 0.8 mm radius (0.03 in. radius)
Q Chamfer 1 mm (0.04 in.)
R Less than 3 mm (Less than 0.1 in.)
S M24 x Pitch 1.5
A 50.98 to 51.02 mm (2.007 to 2.008 in.)
B 8 mm dia. depth 12 mm (0.31 in. dia. depth 0.472 in.)
C 37 mm dia. (1.5 in. dia)
D 65 mm dia. (2.6 in. dia)
E 42 mm (1.7 in.)
F 24 mm (0.94 in.)
G 18 mm (0.71 in.)
H 36 mm (1.4 in.)
I 3.5 mm (0.14 in.)
J 1.5 mm (0.059 in.)
K 8 mm dia. (0.31 in. dia.)
L 0.09 rad (5
°
)
M 0.09 rad (5
°
)
KiSC issued 09, 2008 A