Kubota M9540, Workshop Manual

Page: 53 / 619

G-34
M8540, M9540, WSM G GENERAL
[11] CHECK POINTS OF EVERY 3000 HOURS
Checking Turbocharger
1. Refer to “[1] CHECKING AND ADJUSTING” at “1. ENGINE”
section.
W1075136
Checking Injection Pump
1. Refer to “[1] CHECKING AND ADJUSTING” at “1. ENGINE”
section.
W1074724
Checking Fuel Injection Timing
1. Refer to “[1] CHECKING AND ADJUSTING” at “1. ENGINE”
section.
W1074768
Checking Intake Air Heater
1. Refer to “4. CHECKING AND ADJUSTING” at “9. ELECTRICAL
SYSTEM” section.
W1074973
[12] CHECK POINTS OF EVERY 1 YEAR
Replacing Air Cleaner Primary Element and Secondary Element
1. Refer to “[4] CHECK POINTS OF EVERY 100 HOURS” in this
section.
W1028012
Checking Air Conditioner Pipe and Hose (CABIN Model)
1. Check to see that all lines and hose clamps are tight and not
damaged.
2. If hoses and clamps are found worn or damaged, replace or
repair them at once.
W1105842
Checking Cabin Isolation Cushion (CABIN Model)
1. Check the cushion (1) for any breakage or fatigue. Replace them
if they are deteriorated.
W1105936
(1) Isolation Cushion
KiSC issued 09, 2008 A