
1-S31
M8540, M9540, WSM
ENGINE
Wire Harness, Heater Hoses and Tool Box
1. Remove the fuse box (1) and (5) from stay.
2. Remove the relay (3) and (4) from stay.
3. Disconnect the compressor switch
1P
connector (2).
4. Remove the
3P
connector from stop solenoid (6) and remove the
connector from engine speed sensor (8).
5. Remove the clamps (10) and disconnect the heater hoses (9)
and drain the coolant.
6. Disconnect the terminal from air heater (7).
7. Remove the intake hose (11) from turbocharger.
8. Disconnect the harness from water temperature sensor (12),
alternator (13), starter (14) and engine oil pressure switch (15).
(When reassembling)
• Assemble the heater hoses as align the both white mark.
W1096401
Hydraulic Pipe and U-joint
1. Disconnect the delivery pipe retaining nut (3).
2. Remove the U-joint retaining screw (1) and slide out the U-joint
(2).
(When reassembling)
W1096819
(1) Fuse Box (Slow Blow)
(2)
1P
Connector
(3) Relay
(4) Relay
(5) Fuse Box
(6) Stop Solenoid
(7) Air Heater
(8) Engine Speed Sensor
(9) Heater Hose
(10) Clamp
(11) Intake Hose
(12) Water Temperature Sensor
(13) Alternator
(14) Starter
(15) Engine Oil Pressure Switch
(16) Tool Box
Tightening torque
Delivery pipe retaining nut
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
(1) U-joint Retaining Screw
(2) U-joint
(3) Delivery Pipe Retaining Nut
KiSC issued 09, 2008 A
Summary of Contents for M9540
