Kubota M9540, Workshop Manual, Page: 570 / 619

10-S6
M8540, M9540, WSM CABIN
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : Refer to “5. TIGHTENING TORQUES” at “G. GENERAL” section.)
W1012736
Item N·m kgf·m lbf·ft
Cabin mounting screw and nut 124 to 147 12.6 to 15.0 91.2 to 108
Brake hose retaining nut 16.0 to 24.0 1.6 to 2.4 11.8 to 17.7
A/C unit mounting screw (M8) 9.8 to 15.7 1.0 to 1.6 7.2 to 11.6
Low pressure pipe mounting screw (compressor side) 7.9 to 11.8 0.8 to 1.2 5.8 to 8.7
High pressure pipe 1 mounting screw (compressor
side)
7.9 to 11.8 0.8 to 1.2 5.8 to 8.7
Pressure pipe joint mounting screw (cooler unit side) 7.9 to 11.8 0.8 to 1.2 5.8 to 8.7
High pressure pipe 1 mounting screw (condenser side) 7.9 to 11.8 0.8 to 1.2 5.8 to 8.7
High pressure pipe 2 retaining nut (receiver side) 11.8 to 14.7 1.2 to 1.5 8.7 to 10.8
Compressor mounting screw 24.5 to 29.4 2.5 to 3.0 18.1 to 21.7
Compressor bracket mounting screw (M8) to aluminum
parts
17.7 to 20.5 1.8 to 2.1 13.1 to 15.1
Compressor bracket mounting screw (M8) to
ordinariness parts
23.6 to 27.4 2.4 to 2.8 17.4 to 20.2
Compressor bracket mounting screw (M10) to
ordinariness parts
48.1 to 55.8 4.9 to 5.7 35.5 to 41.2
Magnetic clutch mounting screw 15.0 to 21.0 1.5 to 2.1 11.1 to 15.5
Master cylinder hose retaining nut 22.6 to 27.5 2.3 to 2.8 16.6 to 20.3
Power steering joint shaft mounting screw 23.6 to 27.4 2.4 to 2.8 17.4 to 20.2
Rear wheel mounting nut 343 to 401 35.0 to 41.0 254 to 297
Wiper arm mounting nut (front wiper) 6.3 to 9.3 0.7 to 1.0 5.0 to 6.9
Wiper arm mounting nut (rear wiper) 7.9 to 9.3 0.8 to 1.0 5.8 to 6.9
Wiper motor mounting screw 7.9 to 9.3 0.8 to 1.0 5.8 to 6.9
KiSC issued 09, 2008 A